Ende beginnen und wenn später ein Teil in der Mitte eingesetzt oder ausgetauscht werden muss, tut man sich schwer.
Außerdem fällt beim Kürzen eines Rohres nur Abfall und kein verwendbares zweites Rohrstück an.
Die Vorteile des für Düker 1968 zugelassenen muffenlosen Systems ( SML ) waren eindeutig:
www.dueker.deFor example, the installation must always be started at the lower and, and if a part in the middle is to be inserted or changed later on, plumbers had to struggle.
Furthermore, when cutting a pipe to length, you get only discards and not a second usable piece of pipe.
The advantages of the socketless ( hubless ) system SML, which was approved for Düker in 1968, were obvious: the pipes could be cut without trouble, and practically all rests could be used, so that the 3m lengths as of today could be introduced.
www.dueker.de17.12.2013 | Vom Eckigen zum Runden - mehr Freiheiten im Produktdesign
Dieses kurze Rohrstück verbindet zwei Teile einer Gasturbine.
Der fließende Übergang von einer runden in eine eckige Form ist mit herkömmlichen Produktionsverfahren schwierig herzustellen.
www.siemens.comDec 17, 2013 | From square to round – More freedom in product design
This short pipe section connects two parts of a gas turbine.
The fluid transition from round to square is difficult to achieve using conventional production methods.
www.siemens.comRohrstück von ca. 80cm Durchmesser, vorne offen.
Drei Männer machen sich daran zu schaffenRohrstück von ca. 80cm Durchmesser, vorne offen.
www.wieninternational.atSection of tube 80 cm in diameter, open at the end, with three men are working on it
Section of tube 80 cm in diameter, open at the end, with three men are working on it
www.wieninternational.atChcesz dodać słowo, frazę lub tłumaczenie?
Wyślij nowe hasło.